Home > News > Wireless video doorbell circuit design
Wireless video doorbell circuit design
2012-10-03 17:09:00

 

Wireless video doorbell for simple SPST doorbell button, the device employs a rectifying diode and a ballast capacitor voltage input stage circuit. On the doorbell button, power is connected through a rectifying diode or a series of rectifier diode is called a full wave rectifier, only allows current to flow in one direction, the ballast capacitor. Ballast capacitor charges faster than the rest of the circuit is required in order to complete a given song. Once the button is released, the capacitor retains charge and can maintain power short time to the rest of the circuit.

For mixed, wired and wireless doorbell, input, a special door bell button is required for maintenance of power continuously the doorbell ringing. This circuit is similar to the above, except that the rectifier diode now moved the doorbell button housing. The doorbell button allows the positive and negative of AC side signal flow to the circuit, at the same time the release button allows only positive or negative side into the circuit.

Differential complete and half wave signal, video doorbell can function as, in front of the line, but also provide continuous power for other purposes such as receiving the wireless doorbell door bell button


  [Return Home] [Print] [Go Back]   

Contact Us

  • Contact Person:

    DongGuang HongZhao Innovation Electronic Co., Ltd.
  • Tel:

    0769-83532821
  • Fax:

    0769-86969800
  • E-mail:

    hongzhao@hongzhao-china.com